(12-01-2016, 09:11 PM)AbundanceCH Wrote: [ -> ] (12-01-2016, 09:01 PM)Steven Wrote: [ -> ] (12-01-2016, 08:39 PM)Shannon Wrote: [ -> ]Checking against the md5 hashes will tell you the answer you crave. 
But yes, they use different ASRB ratios.
I'm embarrassed to say this but I don't know how to check against the md5 hashes. I don't know what to look for or how interpret them or what to compare them to.
Same here. Maybe Shannon can put a sticky somewhere.
If you guys are running Windows, here's an easy-to-use freeware checker:
http://www.winmd5.com/
All instructions should be there.
Any of you guys playing the FLAC hybrid on the iPhone?
Seems really loud even at 40% volume, what you guys got the volume on? (earphones)
Yeah we were blowing up pretty hardcore for a bit there.
(12-01-2016, 09:16 PM)dweller94 Wrote: [ -> ]Any of you guys playing the FLAC hybrid on the iPhone?
Seems really loud even at 40% volume, what you guys got the volume on? (earphones)
I said the same thing to Shannon. My trickling stream hybrid in Frequensee has the ultrasonic about 15-20 decibels louder than the masked stream part. He said it's only 1-2 decibels different but my Frequensee shows like 15-20 decibels difference, makes calibrating a good volume hard as if the masked is too low, it isn't effective.
He seemed to think there was an issue on my end. But if you and others have a similar issue, it may be a volume thing with the hybrid after all.
(12-01-2016, 09:15 PM)Have at ye Wrote: [ -> ] (12-01-2016, 09:11 PM)AbundanceCH Wrote: [ -> ] (12-01-2016, 09:01 PM)Steven Wrote: [ -> ] (12-01-2016, 08:39 PM)Shannon Wrote: [ -> ]Checking against the md5 hashes will tell you the answer you crave.
But yes, they use different ASRB ratios.
I'm embarrassed to say this but I don't know how to check against the md5 hashes. I don't know what to look for or how interpret them or what to compare them to.
Same here. Maybe Shannon can put a sticky somewhere.
If you guys are running Windows, here's an easy-to-use freeware checker: http://www.winmd5.com/
All instructions should be there.
I will try to remember to make a sticky tomorrow.
(12-01-2016, 09:31 PM)CatMan Wrote: [ -> ] (12-01-2016, 09:16 PM)dweller94 Wrote: [ -> ]Any of you guys playing the FLAC hybrid on the iPhone?
Seems really loud even at 40% volume, what you guys got the volume on? (earphones)
I said the same thing to Shannon. My trickling stream hybrid in Frequensee has the ultrasonic about 15-20 decibels louder than the masked stream part. He said it's only 1-2 decibels different but my Frequensee shows like 15-20 decibels difference, makes calibrating a good volume hard as if the masked is too low, it isn't effective.
He seemed to think there was an issue on my end. But if you and others have a similar issue, it may be a volume thing with the hybrid after all.
I don't think I made myself understood.
The volume of the ultrasonic track and the masked track that are used to make the hybrid tracks is unchanged by me. They are the exact same volumes as the separate ones.
When I put them together, there is an additive effect that either must be compensated for or you have an effective +1 or +2 dB of volume increase because of this effect.
You only have to compensate for that +1-2 dB. Otherwise, just use it where the masked track is comfortable and the ultrasonic doesn't bother you.
(12-01-2016, 09:31 PM)CatMan Wrote: [ -> ] (12-01-2016, 09:16 PM)dweller94 Wrote: [ -> ]Any of you guys playing the FLAC hybrid on the iPhone?
Seems really loud even at 40% volume, what you guys got the volume on? (earphones)
I said the same thing to Shannon. My trickling stream hybrid in Frequensee has the ultrasonic about 15-20 decibels louder than the masked stream part. He said it's only 1-2 decibels different but my Frequensee shows like 15-20 decibels difference, makes calibrating a good volume hard as if the masked is too low, it isn't effective.
He seemed to think there was an issue on my end. But if you and others have a similar issue, it may be a volume thing with the hybrid after all.
Yeah, I can't measure on FrequenSee because this is the phone I usually use to measure and I'm playing DMSI atm, my masked is really low at the moment usually I have it on 75-80% volume and it's currently on 30% it still sounds loud (ultrasonic seems unbearable), I'm also developing an earache.. ideally the ultrasonic audio should be set much lower in the hybrid not sure may just use masked file for time being..
I'll stick to masked on earphones unless I use my speakers..
(12-01-2016, 09:15 PM)Have at ye Wrote: [ -> ]If you guys are running Windows, here's an easy-to-use freeware checker: http://www.winmd5.com/
All instructions should be there.
@Have at ye
Thanks! That helped!
Very clear instructions, and one value didn't match so I'm downloading it again.
What is the file size of 3.0.1A flac.zip? I need to know because i can't tell how long the download will take otherwise.
Thanks
Day one done, my observation is that I wanted to listen louder, but with headphones I'm not risking ear damage(hybrid tracks). Hm...
Oh, did I forget to mention, it will now autocorrect volume by telling you if it's too loud or not loud enough?
Your subconscious will guide you. Follow those urges.
(12-01-2016, 10:32 PM)Shannon Wrote: [ -> ]Oh, did I forget to mention, it will now autocorrect volume by telling you if it's too loud or not loud enough?
Your subconscious will guide you. Follow those urges.
Interesting!
I'm guessing the euphoria tags are there, I can't even, I'm so happy right now!