(06-25-2024, 05:48 AM)callie Wrote: [ -> ]Didn’t see self acceptance as one of the goals in self development. Will it make it in?
For those of you wondering if your specific thing made it in, relax. I've got you. The only two things that didn't make it in were ideas that were just not going to be helpful.
(06-25-2024, 07:58 AM)Frankie Wrote: [ -> ]https://subliminal-talk.com/Thread-Shann...#pid263414
Shannon Wrote: [ -> ]1. X4A-2000's Key Script is finally finished being developed after something like 7 months. I don't have a lot of time to work on it right now, so it may not get built this month, but after it gets built it will go into testing for a while. I'm hoping to test it personally AND have at least one of my T2/T3 testers also test it. I expect testing to last between 1 and 4 months, possibly as long as 6. If it passes testing, it will be released as a Premium program. Whereas the 1xxx branch of X4A is as wide and general as possible, X4A-2000 is more focused in the type of woman I expect it to be useful for.
2. When 6G rolls around, I will be re-building X4A-1511 in 6G as X4A-1600. The 1xxx branch is so good that it is well worth doing that. Also, the 2xxx and later branches will have very different goals and approaches, ad be Premium programs. X4A-1600 is not planned to be a Premium program.
So glad that X4A-1600 would be available down the road since that's supposed to "cast a wider net" if I weren't mistaken, while an upgrade to 6G shouldn't hurt either.
OTOH, other programs in 6G would still take priority and therefore X4A-1600 might not be built in a fairly long time then?
BTW, most likely DMSI could very well be yet another candidate for an upgrade at some point?
The X4A-1xxx series is the most open ended of the X4A series.
When 6G shows up there's going to be a flurry of activity because we have some very important titles to be built shortly after it shows up, but upgrading X4A-1511 to X4A-1600 simply requires a rebuild of the key script using the new skeleton script and build techniques. It won't take much time. At the same time, I'm going to be very busy with the first two programs and a flood of requests after those. So we shall see.
I have been contemplating upgrading DMSI to 5.0 in 5.11G. My original goal was to only build it one more time in 6G but it has been longer than I expected. At the same time, that would mean I had to build it as a 6G also, and then there is the fact that a 5.11G release would have to be released as a Premium. And I have to work on g^... so it's getting to the point that I have more to do than one person can handle. We shall see. I think I'm going to focus on developing the 6G skeleton script after Self Development is released, and then build and start testing the first 6G prototype. 6G itself is still months away. So who knows, maybe a DMSI v5 could happen, but I'm far from solid on that. We haven't even released X4A-2000 yet.
(06-25-2024, 09:51 AM)Shannon Wrote: [ -> ] (06-25-2024, 07:58 AM)Frankie Wrote: [ -> ]https://subliminal-talk.com/Thread-Shann...#pid263414
So glad that X4A-1600 would be available down the road since that's supposed to "cast a wider net" if I weren't mistaken, while an upgrade to 6G shouldn't hurt either.
OTOH, other programs in 6G would still take priority and therefore X4A-1600 might not be built in a fairly long time then?
BTW, most likely DMSI could very well be yet another candidate for an upgrade at some point?
The X4A-1xxx series is the most open ended of the X4A series.
When 6G shows up there's going to be a flurry of activity because we have some very important titles to be built shortly after it shows up, but upgrading X4A-1511 to X4A-1600 simply requires a rebuild of the key script using the new skeleton script and build techniques. It won't take much time. At the same time, I'm going to be very busy with the first two programs and a flood of requests after those. So we shall see.
I have been contemplating upgrading DMSI to 5.0 in 5.11G. My original goal was to only build it one more time in 6G but it has been longer than I expected. At the same time, that would mean I had to build it as a 6G also, and then there is the fact that a 5.11G release would have to be released as a Premium. And I have to work on g^... so it's getting to the point that I have more to do than one person can handle. We shall see. I think I'm going to focus on developing the 6G skeleton script after Self Development is released, and then build and start testing the first 6G prototype. 6G itself is still months away. So who knows, maybe a DMSI v5 could happen, but I'm far from solid on that. We haven't even released X4A-2000 yet.
I personally would be very much up for a 5.11g DMSI 5.0. It's why I came to these forums, to test these bad boys.
It would also be a good opportunity for a final round of feedback before the 6G version.
(06-26-2024, 02:51 AM)Have at ye Wrote: [ -> ] (06-25-2024, 09:51 AM)Shannon Wrote: [ -> ]The X4A-1xxx series is the most open ended of the X4A series.
When 6G shows up there's going to be a flurry of activity because we have some very important titles to be built shortly after it shows up, but upgrading X4A-1511 to X4A-1600 simply requires a rebuild of the key script using the new skeleton script and build techniques. It won't take much time. At the same time, I'm going to be very busy with the first two programs and a flood of requests after those. So we shall see.
I have been contemplating upgrading DMSI to 5.0 in 5.11G. My original goal was to only build it one more time in 6G but it has been longer than I expected. At the same time, that would mean I had to build it as a 6G also, and then there is the fact that a 5.11G release would have to be released as a Premium. And I have to work on g^... so it's getting to the point that I have more to do than one person can handle. We shall see. I think I'm going to focus on developing the 6G skeleton script after Self Development is released, and then build and start testing the first 6G prototype. 6G itself is still months away. So who knows, maybe a DMSI v5 could happen, but I'm far from solid on that. We haven't even released X4A-2000 yet.
I personally would be very much up for a 5.11g DMSI 5.0. It's why I came to these forums, to test these bad boys.
It would also be a good opportunity for a final round of feedback before the 6G version.
Dmsi in 5.11g sounds good to me as well.
(06-25-2024, 07:58 AM)Frankie Wrote: [ -> ]BTW, most likely DMSI could very well be yet another candidate for an upgrade at some point?
DMSI 5.11g would be an instant buy for a lot of people but i doubt Shannon is going to do it.
Just bought self development. Looking forward to running it after I finish EHPRA6!
@
Shannon congrats on self development, looks great,
Just one question, you mention that seld development can be shared with wife and children in the description page, so if i buy this can i let my wife and 10 year old daughter listen to this at their own time and i listen to this at my own time without trigerring the anti piracy script?
Only reason we cant listen together at the same is i have another child that is under the age of 10, so according to your instructions it is not suitable for under 10.
Have bought the new Sub. Hoping it will break this spell of your subs not working for me Shannon, I’ve suspected for a long time that it’s due to a fundamental self acceptance issue.
I have also bought the new Sub/Exp, I now have to wait till August 24th to use it though..
Cant wait to see what kind of improvements it will give me! : )
(06-26-2024, 10:43 PM)Frosted Wrote: [ -> ]Just bought self development. Looking forward to running it after I finish EHPRA6!
Thank you, your support is appreciated.
(06-26-2024, 11:52 PM)HD87 Wrote: [ -> ]@Shannon congrats on self development, looks great,
Just one question, you mention that seld development can be shared with wife and children in the description page, so if i buy this can i let my wife and 10 year old daughter listen to this at their own time and i listen to this at my own time without trigerring the anti piracy script?
Only reason we cant listen together at the same is i have another child that is under the age of 10, so according to your instructions it is not suitable for under 10.
Only the owner of that copy can play and use and have a copy of it without triggering the AP script. If you buy a copy and then give a copy to your wife and kid to use on their own time, they now have unlimited possession and use of the program, so three people are getting unlimited use, but only one copy was paid for.
However, if they are present and exposed while YOU (the proper owner) is using your copy, and they do not have a copy of their own or use it at their whim, then one copy was paid for, one copy is owned by one person, and those who are exposed are not gaining the privileges that come with ownership (having a copy, using it as they please) but they are being exposed during your reasonable use, so it is not going to trigger AP script.
If you want them to have their own copy and use it whenever they please, they need to have their own paid for copies.
Depending on how this all works out, you could potentially wait for the under 10 child to be asleep, and then use your copy while the wife and 10 year old are also present.
(06-27-2024, 05:01 AM)Darwin Wrote: [ -> ]Have bought the new Sub. Hoping it will break this spell of your subs not working for me Shannon, I’ve suspected for a long time that it’s due to a fundamental self acceptance issue.
Much appreciated. I would love to know what sort of results you get from this program, because if you don't get results from this, then we need to have a chat. lol But seriously, if you don't get results from this, I would very much like to have a one on one interview with you and see if we can't find what's going on.
(06-27-2024, 05:24 AM)MrGnome Wrote: [ -> ]I have also bought the new Sub/Exp, I now have to wait till August 24th to use it though..
Cant wait to see what kind of improvements it will give me! : )
I appreciate your support, thank you. I think this program will be extremely helpful and useful for you.