Quote:The amazing thing is, this program I am testing has absolutely nothing to do with healing and clearing or fear removal.  No such scripting at all.  This is all a side effect as it works it's way through any and all resistance standing in the way of achieving it's primary goal...and it's making significant changes and adjustments that are freeing me from long held self limitations I didn't even know I had in many of these cases. 

Quote:1.618 Hz. Low Delta. This frequency corresponds to Phi, which is a special ratio that occurs repeatedly in nature.  It is 1.618:1, and it is everywhere, including in your body.  For example, the ratio of the length of your arms and legs to the joints of your arms and legs is approximately 1.618:1.  It's in your hands, feet, fingers, toes, face, body.  This ratio shows up in flowers, pine cones, ferns, leaves, shells and other places also.  The closer to matching this ratio a person is in their proportions, the more beautiful and aesthetically pleasing they will be to the eye.
2.618 Hz. Delta. This is Phi squared, the number you get when you multiply Phi by itself.
3.141 Hz. Delta. This is Pi, the ratio of the circumference of a perfect circle (the distance around it) to its diameter (the furthest distance between any two points on that circle).
4.230 Hz: Low Theta. This is the number that results from cubing Phi, which is to say, Phi times Phi times Phi.  Depending on how experienced you are with meditation, this frequency may require practice to remain aware of what is happening while it is the dominant frequency of your brain.
4.500 Hz: Low Theta.  This frequency is known as the "Shamanic Trance" frequency.  Indigenous peoples tend to gravitate to this frequency during ceremonies, often involving drums and chanting, where they are trying to have special experiences that lead them to better wisdom and understanding, contact with the spirit world or special, secret knowledge.
5.083 Hz. Theta. The number that results when you multiply Pi times Phi.
6.300 Hz. Theta. This is the average frequency found dominant in the brain while a person is inebriated by alcohol.
7.830 Hz. Low Alpha. This is the first Schumann Resonance peak, which is the frequency at which the atmosphere of the Earth itself resonates.  Some people believe that it is useful for attuning one's awareness with that of the Earth.
9.860 Hz. Alpha. Pi multiplied by itself gives you this number.
13.500 Hz. Low Beta. The Sensori-Motor Rhythm (SMR) Midpoint (debated by some sources, who give different ranges of low and high for SMR).  The sensori-motor rhythm is the band of frequencies at the high end of Alpha and lower end of the Beta range where one is awake, relaxed, eyes open and the cortical sensory region of the brain is said to be "idling".  Some people believe this frequency range is helpful for insomnia, anxiety, depression, attention, focus and other things as well.
14.300 Hz. Beta. The 2nd Schumann Resonance peak. Some call this the 2nd harmonic of the Earth Resonance, and believe it is useful for attuning one's awareness to that of the Earth.
20.800 Hz. Beta. The 3rd Schumann Resonance peak. Some call this the 3rd harmonic of the Earth Resonance, and believe it is useful for attuning one's awareness to that of the Earth.
27.300 Hz. Beta. The 4th Schumann Resonance peak. Some call this the 4th harmonic of the Earth Resonance, and believe it is useful for attuning one's awareness to that of the Earth.
31.000 Hz. High Beta. This is the number that results when you multiply Pi times Pi times Pi.
40.000 Hz. Very High Beta. There are some who believe that with regular use, this frequency has some correlation to certain aspects of brain health.
44.000 Hz. Low Gamma.  This frequency is associated by some with high levels of focus, attention, awareness and function of the brain for higher level problem solving, including solving complex math and other types of challenges and puzzles.  Potentially useful for helping to do better on logic focused tests.
77.700 Hz. High Gamma. Theoretically, the closest the human brain can get to operating at a frequency of 777 Hz.  Some regard 777 as a special number.

(04-17-2025, 03:59 AM)dweller94 Wrote: @Shannon
Just curious—based on your latest journal, is the experimental program using the same 6G tech that'll be in future 6G subs, or are you testing out new stuff that could expand or change the 6G tech?

This is excellent news.

Quote:The amazing thing is, this program I am testing has absolutely nothing to do with healing and clearing or fear removal.  No such scripting at all.  This is all a side effect as it works it's way through any and all resistance standing in the way of achieving it's primary goal...and it's making significant changes and adjustments that are freeing me from long held self limitations I didn't even know I had in many of these cases. 

Quote: Wanted to give some feedback on (Special Meditations, Ver. 2.0 - 17 Volume Set (Brainwave Entrainment Audio Only)
Shannon, I had an excellent meditation session and would love to share what happened, but my spiritual masters orders not to. I was using 7.830 Hz (Low Alpha) from the Special Meditations Ver. 2.0 – 17 Volume Set (Brainwave Entrainment Audio Only).

This was my first run with that audio, and it truly does what it says on the box—an absolute godsend for me. I can’t thank you enough. I’ll definitely be experimenting with the others too.

Quote:Quick question: in your experience, which frequency in the set comes closest to creating a state where you’re asleep but still awake—if that makes sense? I've achieved this without subs but it's difficult you have to reduce sleep sugar intake etc but I feel like your audios can do this just need to know which from the following comes closest to that state.

Quote:1.618 Hz. Low Delta. This frequency corresponds to Phi, which is a special ratio that occurs repeatedly in nature.  It is 1.618:1, and it is everywhere, including in your body.  For example, the ratio of the length of your arms and legs to the joints of your arms and legs is approximately 1.618:1.  It's in your hands, feet, fingers, toes, face, body.  This ratio shows up in flowers, pine cones, ferns, leaves, shells and other places also.  The closer to matching this ratio a person is in their proportions, the more beautiful and aesthetically pleasing they will be to the eye.
2.618 Hz. Delta. This is Phi squared, the number you get when you multiply Phi by itself.
3.141 Hz. Delta. This is Pi, the ratio of the circumference of a perfect circle (the distance around it) to its diameter (the furthest distance between any two points on that circle).
4.230 Hz: Low Theta. This is the number that results from cubing Phi, which is to say, Phi times Phi times Phi.  Depending on how experienced you are with meditation, this frequency may require practice to remain aware of what is happening while it is the dominant frequency of your brain.
4.500 Hz: Low Theta.  This frequency is known as the "Shamanic Trance" frequency.  Indigenous peoples tend to gravitate to this frequency during ceremonies, often involving drums and chanting, where they are trying to have special experiences that lead them to better wisdom and understanding, contact with the spirit world or special, secret knowledge.
5.083 Hz. Theta. The number that results when you multiply Pi times Phi.
6.300 Hz. Theta. This is the average frequency found dominant in the brain while a person is inebriated by alcohol.
7.830 Hz. Low Alpha. This is the first Schumann Resonance peak, which is the frequency at which the atmosphere of the Earth itself resonates.  Some people believe that it is useful for attuning one's awareness with that of the Earth.
9.860 Hz. Alpha. Pi multiplied by itself gives you this number.
13.500 Hz. Low Beta. The Sensori-Motor Rhythm (SMR) Midpoint (debated by some sources, who give different ranges of low and high for SMR).  The sensori-motor rhythm is the band of frequencies at the high end of Alpha and lower end of the Beta range where one is awake, relaxed, eyes open and the cortical sensory region of the brain is said to be "idling".  Some people believe this frequency range is helpful for insomnia, anxiety, depression, attention, focus and other things as well.
14.300 Hz. Beta. The 2nd Schumann Resonance peak. Some call this the 2nd harmonic of the Earth Resonance, and believe it is useful for attuning one's awareness to that of the Earth.
20.800 Hz. Beta. The 3rd Schumann Resonance peak. Some call this the 3rd harmonic of the Earth Resonance, and believe it is useful for attuning one's awareness to that of the Earth.
27.300 Hz. Beta. The 4th Schumann Resonance peak. Some call this the 4th harmonic of the Earth Resonance, and believe it is useful for attuning one's awareness to that of the Earth.
31.000 Hz. High Beta. This is the number that results when you multiply Pi times Pi times Pi.
40.000 Hz. Very High Beta. There are some who believe that with regular use, this frequency has some correlation to certain aspects of brain health.
44.000 Hz. Low Gamma.  This frequency is associated by some with high levels of focus, attention, awareness and function of the brain for higher level problem solving, including solving complex math and other types of challenges and puzzles.  Potentially useful for helping to do better on logic focused tests.
77.700 Hz. High Gamma. Theoretically, the closest the human brain can get to operating at a frequency of 777 Hz.  Some regard 777 as a special number.

(04-17-2025, 05:42 AM)kserenyi Wrote: I'll be coming to the end of UMS 3.1 Stage 1 in about a week and a half.  Is Stage 2 still coming out soon? 

Thanks

(04-18-2025, 12:07 AM)ichigo Wrote: Hey Shannon, I saw you mentioned the next DMSI is in rotation. Is there a very rough ETA? Is AM 6G still coming first or is it possible to get DMSI 6G out before?

Quote:Regarding the snipers, I like the way X4A's work, perhaps you could do the same with DMSI? I.e.

1.) Sniper fires within xx feet
2.) Sniper fires if in sight (so it's working through video, pics, imagination)
3.) Incl. any limiters you feel is necessary to include

Bringing back the long range sniper could be a waste of resources IMO. If you really want to attract a specific person you could just have a photo of them near or think about them a lot - as long as they're outside the limiters that should work.

Ed: Oh and also you're probably already doing it, but like with X4A would be cool if there's no shields so there's more energy for sexy aura and people can add a shield if they want

(04-19-2025, 11:46 AM)Shannon Wrote: I'm sure it would be a simple boot from USB stick and mass change the permissions in a RH based distro, but that's apparently impossible under Debian based Linux because they don't trust you to know how to safely administer tyour own damned system.  But this is why I absolutely HATE Debian based Linux.

Quote:Paragon HFS+ for Windows 11.4.298

Paragon Linux File Systems for Windows 5.2.1183

(04-19-2025, 01:24 PM)Frankie Wrote:

(04-19-2025, 11:46 AM)Shannon Wrote: I'm sure it would be a simple boot from USB stick and mass change the permissions in a RH based distro, but that's apparently impossible under Debian based Linux because they don't trust you to know how to safely administer tyour own damned system.  But this is why I absolutely HATE Debian based Linux.

Barring issues related to file system corruption or even failing hardware, let's see how it goes.

First of all, does it mean that BOTH Debian / Ubuntu based and RH based distros might somehow turn out to be no good so far? For example, neither Fedora (RH) nor Rescuezilla (Ubuntu) would be able to do anything about the ACLs / permissions at all?

https://fedoraproject.org/wiki/Respins-SIG
https://dl.fedoraproject.org/pub/alt/live-respins/

https://rescuezilla.com/help
https://github.com/rescuezilla/rescuezilla/releases/tag/2.6

Not sure if you're connecting those drives via SATA / NVMe / Thunderbolt / USB in the first place, while assuming you weren't dealing with NAS (i.e. CIFS / iSCSI / NFS / ZFS etc.) of some sort.

In that case, just wondering if you're unable to access those files related to AM6 (from a long time ago) because of stuff like POSIX ACLs?

https://docs.redhat.com/en/documentation/red_hat_gluster_storage/3/html/administration_guide/sect-posix_access_control_lists#Removing_POSIX_ACLs

Let's hope that either Fedora or Rescuezilla would allow you to do something like this, even if we're dealing with local drives in the first place:

https://superuser.com/questions/1490827/remove-acls-in-linux-permissions

A similar one here:

https://serverfault.com/a/1048688
https://github.com/TheKitoInc/Scripts/blob/main/FixHomesDirectoryPermissions.sh

As a last resort, it wouldn't hurt to to visit https://www.majorgeeks.com (trustworthy site) and then grab a copy since it's able to access Linux File Systems as well:

"Sergei Strelec's WinPE 64-Bit for Windows 10 and 11"

Quote:Paragon HFS+ for Windows 11.4.298

Paragon Linux File Systems for Windows 5.2.1183

I know it's created by a Russian guy, though I've been using that to save my own @$$ over the years.

---

BTW, that experimental program seemed to be quite interesting.

(04-19-2025, 11:46 AM)Shannon Wrote:

(04-18-2025, 12:07 AM)ichigo Wrote: Hey Shannon, I saw you mentioned the next DMSI is in rotation. Is there a very rough ETA? Is AM 6G still coming first or is it possible to get DMSI 6G out before?

That is going to depend on how things go with AM7.  I have recently lost my work on AM7, because the files on my hard drive magically disappeared and magically don't seem to be present in any of my multiple backups.  

Now, for some reason, I'm having trouble getting access to the original backup of AM6 script because this idiotic distro seems to think I don't have the right permissions to access my own damned backups made with my previous distribution.  I haven't had much chance to chase down the reasons behind this idiocy and fix them yet because of all the other crap hitting the fan lately.  I'm sure it would be a simple boot from USB stick and mass change the permissions in a RH based distro, but that's apparently impossible under Debian based Linux because they don't trust you to know how to safely administer tyour own damned system.  But this is why I absolutely HATE Debian based Linux.  

The security measures it takes regarding root access are asinine at best, and now not only do I have to deal with this shit show, but my computer keeps locking hard and requiring a power cycle to recover about 50% of the time whenever I try to lock the screen, the screen locks automatically, or I try to log out, try to shut down or reboot the system, or suspend it.  Re-installation of the entire system has only made things worse, and dozens of updates have only forced me to power cycle the damned thing more in my efforts to fix it.  I have never seen such bullshit from any Linux distro, but I have never liked Debian based distros because of the stupid way they handle root access, like you're incometent and stupid and can't be trusted to run or administer your own damned system.

From 2004 to 2025, I used a RedHat based distribution that never ever caused me problems like this, but they seem to have gone off into lala land and decided to commit suicide by cluelessly switching their motto from "The Distro Hopper Stopper" to "The Boomer Distribution"...  On top of that, this new production system has recovery features custom built for the distro it comes with, and I'd really like to keep that safety net.

So I'm working  on it, but it's not going according to Plan.  At this rate, DMSI might actually get worked on first.

Quote:Regarding the snipers, I like the way X4A's work, perhaps you could do the same with DMSI? I.e.

1.) Sniper fires within xx feet
2.) Sniper fires if in sight (so it's working through video, pics, imagination)
3.) Incl. any limiters you feel is necessary to include

Bringing back the long range sniper could be a waste of resources IMO. If you really want to attract a specific person you could just have a photo of them near or think about them a lot - as long as they're outside the limiters that should work.

Ed: Oh and also you're probably already doing it, but like with X4A would be cool if there's no shields so there's more energy for sexy aura and people can add a shield if they want

I'm planning to have DMSI's sniper fire within a set distance, regardless of if you can actually physically see the person, and respond to visual access to the person as well.  The long range sniper may or may not happen.  Depends on what the models tell me.

(04-21-2025, 12:15 PM)rarus426 Wrote: @Shannon

There are different instructions you provided for DRS depending on whether using the program by itself or using this program with another 6G title. I am using this program with another 6G title. I wanted to confirm what will be the listening duration of DRS when I will be listening this during off days of the another 6G title? Will that still be 2 loops per day for 24 hour shielding or it will be 55 mins per day for 24 hour shielding considering during off days of another 6G title, DRS is the only title I am running?

Quote:kserenyi Wrote:
I'll be coming to the end of UMS 3.1 Stage 1 in about a week and a half.  Is Stage 2 still coming out soon?

---

Ampersnd Wrote:
I trust that Stage 2 of UMS 3.1 will be made available for streaming/subscription soon, given that we're at around day 25 since the release of the first stage.

Shannon Wrote:Almost finished with the config calculations for Stage 2 of UMS v3.1.

Hopefully publishing later tonight.