• Welcome to Subliminal Talk!
  • The best in subliminal audio
Hello There, Guest! Login Register


Title: DMSI 3.5 question
Thread Modes
#1
Question 
Hello,

sorry, but I’m not sure what this means (from the DMSI 3.5 description):
Quote: 15. Because this program is experimental, you are only eligible for a refund of any kind if you directly purchased DMSI 3.5 at full price.  If you purchased DMSI at any time before v3.5 was released, you get a free upgrade to DMSI 3.5, but you are not eligible for a refund.

Do buyers of the previous version 3.2.2 also get a free upgrade or is this referring to the buyers of the first release of 3.5 only?
Thanks a lot
Marykate
 
Reply
#2
(03-02-2022, 04:47 AM)marykate Wrote: Hello,

sorry, but I’m not sure what this means (from the DMSI 3.5 description):
Quote: 15. Because this program is experimental, you are only eligible for a refund of any kind if you directly purchased DMSI 3.5 at full price.  If you purchased DMSI at any time before v3.5 was released, you get a free upgrade to DMSI 3.5, but you are not eligible for a refund.

Do buyers of the previous version 3.2.2 also get a free upgrade or is this referring to the buyers of the first release of 3.5 only?
Thanks a lot
Marykate

If you purchased any version prior to v 3.5, you get a free upgrade to v 3.5.
Subliminal Audio Specialist & Administrator

The scientist has a question to find an answer for. The pseudo-scientist has an answer to find a question for. ~ "Failure is the path of least persistence." - Chinese Fortune Cookie ~ Logic left. Emotion right. But thinking, straight ahead. ~ Sperate supra omnia in valorem. (The value of trust is above all else.) ~ Meowsomeness!
 
Reply
#3
whatever happened to DMSI 3.5 sales page?
 
Reply
#4
(03-04-2022, 04:44 AM)SexyMofo Wrote: whatever happened to DMSI 3.5 sales page?

Given history of pulling down pages before releases, V3.6 must be in production. Which makes sense, seems V3.5 hasn't had much fanfare, sadly.
 
Reply
#5
(03-04-2022, 09:28 AM)CatMan Wrote:
(03-04-2022, 04:44 AM)SexyMofo Wrote: whatever happened to DMSI 3.5 sales page?

Given history of pulling down pages before releases, V3.6 must be in production. Which makes sense, seems V3.5 hasn't had much fanfare, sadly.

Well, I might as well fill you in at this point.

The custom job was a special request for me to alter DMSI 3.5 in certain ways that the person making the custom order believed might make it work.  Since I trust them not to release it to anyone else and to be honest about their results with it, I decided to accept the custom and build what they asked for. 

It isn't finished yet, and it will be about a week longer before it's finished and delivered.  That does not mean you guys are getting a new version of DMSI!  What it means is that this custom version will be in testing by the person ordering it for at least a month while we determine whether or not it does what it's designed to do.  If it does, I still cannot release this custom version.  It needs adjustments to a couple modules to make it something that I can release to the general public.  But if I do see that this custom version works well, I will be publishing a new version of DMSI that is almost identical, with the exception of having upgraded certain modules to make it suitable for general release.  So it is possible that in the next 1 to 3 months, I will be releasing a new version of DMSI, but not guaranteed.  If this custom version does not result in a new version, given the amount of work that has gone into upgrading and improving it, then it's going to be a while before another version is released, because it will need something I don't yet have.

The good news is that regardless, this work on DMSI has resulted in FRM v6.0 and External Facing FRM (EF-FRM) v2.0, which I am pleased with.  This is why, in my poll, I am willing to consider making OF v4.0.

I took down the page for 3.5 so that nobody else would buy it before the next version is released, if it is released, because I don't want to rug-pull anyone who buys 3.5.  If this custom version does not do what is intended, then I will have to decide whether or not to keep 3.5 available, since it does not seem to be getting the intended results.

Regardless of what happens, 3.5 will not be the last version of DMSI that I publish.  I know that this custom job is either going to work for the majority or be very close to what it needs to be, so I am not finished yet. 

Go vote on what you want me to build next.
Subliminal Audio Specialist & Administrator

The scientist has a question to find an answer for. The pseudo-scientist has an answer to find a question for. ~ "Failure is the path of least persistence." - Chinese Fortune Cookie ~ Logic left. Emotion right. But thinking, straight ahead. ~ Sperate supra omnia in valorem. (The value of trust is above all else.) ~ Meowsomeness!
 
Reply
#6
(03-04-2022, 02:28 PM)Shannon Wrote:
(03-04-2022, 09:28 AM)CatMan Wrote:
(03-04-2022, 04:44 AM)SexyMofo Wrote: whatever happened to DMSI 3.5 sales page?

Given history of pulling down pages before releases, V3.6 must be in production. Which makes sense, seems V3.5 hasn't had much fanfare, sadly.

Well, I might as well fill you in at this point.

The custom job was a special request for me to alter DMSI 3.5 in certain ways that the person making the custom order believed might make it work.  Since I trust them not to release it to anyone else and to be honest about their results with it, I decided to accept the custom and build what they asked for. 

It isn't finished yet, and it will be about a week longer before it's finished and delivered.  That does not mean you guys are getting a new version of DMSI!  What it means is that this custom version will be in testing by the person ordering it for at least a month while we determine whether or not it does what it's designed to do.  If it does, I still cannot release this custom version.  It needs adjustments to a couple modules to make it something that I can release to the general public.  But if I do see that this custom version works well, I will be publishing a new version of DMSI that is almost identical, with the exception of having upgraded certain modules to make it suitable for general release.  So it is possible that in the next 1 to 3 months, I will be releasing a new version of DMSI, but not guaranteed.  If this custom version does not result in a new version, given the amount of work that has gone into upgrading and improving it, then it's going to be a while before another version is released, because it will need something I don't yet have.

The good news is that regardless, this work on DMSI has resulted in FRM v6.0 and External Facing FRM (EF-FRM) v2.0, which I am pleased with.  This is why, in my poll, I am willing to consider making OF v4.0.

I took down the page for 3.5 so that nobody else would buy it before the next version is released, if it is released, because I don't want to rug-pull anyone who buys 3.5.  If this custom version does not do what is intended, then I will have to decide whether or not to keep 3.5 available, since it does not seem to be getting the intended results.

Regardless of what happens, 3.5 will not be the last version of DMSI that I publish.  I know that this custom job is either going to work for the majority or be very close to what it needs to be, so I am not finished yet. 

Go vote on what you want me to build next.

@Shannon -- Is there a way we that are actively using the DMSI 3.5 can see the product info page? It was so long I never finished reading it, and I certainly didn't memorize it. I would love to be able to see that info page instead of the 3.3.2. That is actually why I logged in today, because I was wondering about what modules were in it and so on as well as fine points about the instructions/warnings.
Thanks
 
Reply
#7
I have already found it
 
Reply
#8
Done. It has been taken down again, and will not be going back up.
Subliminal Audio Specialist & Administrator

The scientist has a question to find an answer for. The pseudo-scientist has an answer to find a question for. ~ "Failure is the path of least persistence." - Chinese Fortune Cookie ~ Logic left. Emotion right. But thinking, straight ahead. ~ Sperate supra omnia in valorem. (The value of trust is above all else.) ~ Meowsomeness!
 
Reply
#9
(04-01-2022, 12:03 PM)Shannon Wrote: Done.  It has been taken down again, and will not be going back up.

@Shannon

Thanks for doing that.

It was quite helpful. There were a couple things I missed cause I didn't refer back (my memory is still fuzzy post-covid).

Didn't you have the 'menu' of what was turned on and off as part of that, though? 

Maybe I'm confusing it with previous versions...

I am going to run an ASRB cycle of DMSI 3.5 again (just for me, during the day) and taper down my androgen supplementation as the instructions suggest. 

Ron
 
Reply
#10
(03-04-2022, 02:28 PM)Shannon Wrote:
(03-04-2022, 09:28 AM)CatMan Wrote:
(03-04-2022, 04:44 AM)SexyMofo Wrote: whatever happened to DMSI 3.5 sales page?

Given history of pulling down pages before releases, V3.6 must be in production. Which makes sense, seems V3.5 hasn't had much fanfare, sadly.

Well, I might as well fill you in at this point.

The custom job was a special request for me to alter DMSI 3.5 in certain ways that the person making the custom order believed might make it work.  Since I trust them not to release it to anyone else and to be honest about their results with it, I decided to accept the custom and build what they asked for. 

It isn't finished yet, and it will be about a week longer before it's finished and delivered.  That does not mean you guys are getting a new version of DMSI!  What it means is that this custom version will be in testing by the person ordering it for at least a month while we determine whether or not it does what it's designed to do.  If it does, I still cannot release this custom version.  It needs adjustments to a couple modules to make it something that I can release to the general public.  But if I do see that this custom version works well, I will be publishing a new version of DMSI that is almost identical, with the exception of having upgraded certain modules to make it suitable for general release.  So it is possible that in the next 1 to 3 months, I will be releasing a new version of DMSI, but not guaranteed.  If this custom version does not result in a new version, given the amount of work that has gone into upgrading and improving it, then it's going to be a while before another version is released, because it will need something I don't yet have.

The good news is that regardless, this work on DMSI has resulted in FRM v6.0 and External Facing FRM (EF-FRM) v2.0, which I am pleased with.  This is why, in my poll, I am willing to consider making OF v4.0.

I took down the page for 3.5 so that nobody else would buy it before the next version is released, if it is released, because I don't want to rug-pull anyone who buys 3.5.  If this custom version does not do what is intended, then I will have to decide whether or not to keep 3.5 available, since it does not seem to be getting the intended results.

Regardless of what happens, 3.5 will not be the last version of DMSI that I publish.  I know that this custom job is either going to work for the majority or be very close to what it needs to be, so I am not finished yet. 

Go vote on what you want me to build next.

@Shannon -- would it be possible to fill us in on the reports you're getting that make you say you're "not getting the intended results"?

That would help me understand what IS working and what IS NOT working and would influence whether I use this version.

Thanks,
Ron
 
Reply
#11
(04-01-2022, 01:00 PM)rono Wrote:
(03-04-2022, 02:28 PM)Shannon Wrote:
(03-04-2022, 09:28 AM)CatMan Wrote:
(03-04-2022, 04:44 AM)SexyMofo Wrote: whatever happened to DMSI 3.5 sales page?

Given history of pulling down pages before releases, V3.6 must be in production. Which makes sense, seems V3.5 hasn't had much fanfare, sadly.

Well, I might as well fill you in at this point.

The custom job was a special request for me to alter DMSI 3.5 in certain ways that the person making the custom order believed might make it work.  Since I trust them not to release it to anyone else and to be honest about their results with it, I decided to accept the custom and build what they asked for. 

It isn't finished yet, and it will be about a week longer before it's finished and delivered.  That does not mean you guys are getting a new version of DMSI!  What it means is that this custom version will be in testing by the person ordering it for at least a month while we determine whether or not it does what it's designed to do.  If it does, I still cannot release this custom version.  It needs adjustments to a couple modules to make it something that I can release to the general public.  But if I do see that this custom version works well, I will be publishing a new version of DMSI that is almost identical, with the exception of having upgraded certain modules to make it suitable for general release.  So it is possible that in the next 1 to 3 months, I will be releasing a new version of DMSI, but not guaranteed.  If this custom version does not result in a new version, given the amount of work that has gone into upgrading and improving it, then it's going to be a while before another version is released, because it will need something I don't yet have.

The good news is that regardless, this work on DMSI has resulted in FRM v6.0 and External Facing FRM (EF-FRM) v2.0, which I am pleased with.  This is why, in my poll, I am willing to consider making OF v4.0.

I took down the page for 3.5 so that nobody else would buy it before the next version is released, if it is released, because I don't want to rug-pull anyone who buys 3.5.  If this custom version does not do what is intended, then I will have to decide whether or not to keep 3.5 available, since it does not seem to be getting the intended results.

Regardless of what happens, 3.5 will not be the last version of DMSI that I publish.  I know that this custom job is either going to work for the majority or be very close to what it needs to be, so I am not finished yet. 

Go vote on what you want me to build next.

@Shannon -- would it be possible to fill us in on the reports you're getting that make you say you're "not getting the intended results"?

That would help me understand what IS working and what IS NOT working and would influence whether I use this version.

Thanks,
Ron

98% of the reports I get are on the forum.  I don't see people reporting the program fully doing what it's designed to do.  The other 2% are similar to what's on the forum.
Subliminal Audio Specialist & Administrator

The scientist has a question to find an answer for. The pseudo-scientist has an answer to find a question for. ~ "Failure is the path of least persistence." - Chinese Fortune Cookie ~ Logic left. Emotion right. But thinking, straight ahead. ~ Sperate supra omnia in valorem. (The value of trust is above all else.) ~ Meowsomeness!
 
Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Overcoming erectile dysfunction question for gay men Shaun 2 232 02-01-2022, 09:08 AM
Last Post: Shaun
  USLM 4.2 question DavisMind91 8 1,179 08-28-2021, 07:53 PM
Last Post: Shannon
  Sub Question WD99 1 311 08-28-2021, 07:29 PM
Last Post: Shannon
  Question about sub WD99 1 438 08-15-2021, 08:12 PM
Last Post: Shannon
  DMSI gone from shop? zero_force 1 885 11-06-2020, 07:19 PM
Last Post: Benjamin
  Question about Ultrasonic JaneM 2 846 10-06-2020, 08:47 AM
Last Post: JaneM

Forum Jump:


Browsing: 1 Guest(s)